Product Description:
300TV-SP Vertical Slurry Pump is designed to be immersed in liquid for conveying abrasive, coarse particles, dirty water and particle contaminated water. Due to the design of the pump assembly, a shaft seal is not required and the pump can be operated in conditions that most pumps would have a low service life and their seal arrangement would not be effective.
Design Features:
• Fully Cantilevered - Eliminates submerged bearings, packing, lip seals, and mechanical seals that other vertical slurry pumps typically require.
• Impellers - Unique double suction impellers; fluid flow enters the top as well as the bottom. This design eliminates shaft seals and reduces thrust load on the bearings.
• Large Particle - Large particle impellers are also available and enable passing unusually large solids.
• Bearing Assembly - The maintenance friendly bearing assembly has heavy duty roller bearings, robust housings, and a massive shaft.
• Casing - The metal pumps have a heavy walled abrasive resistant Cr27Mo chrome alloy casing. Rubber pumps have a molded rubber casing adhered to sturdy metal structures.
• Column and Discharge Pipe - The metal pump columns and discharge pipes are steel, and the rubber columns and discharge pipes are rubber covered.
• Upper Strainers - Snap in elastomer strainers fit in column openings to prevent overly large particles and unwanted refuse from entering casing of the pump.
• Lower Strainers - Bolt-on cast strainers on the metal pump and molded snap-on elastomer strainers on the rubber pumps protect the pump from oversize particles.
Tobee® 300TV-SP Vertical Slurry Pump Performance Parameters:
|
Model |
Matching power P
(kw) |
Capacity Q
(m3/h) |
Head H
(m) |
Speed n
(r/min) |
Eff.η
(%) |
Impeller dia.
(mm) |
Max.particles
(mm) |
Weight
(kg) |
|
300TV-SP(R) |
22-200 |
288-1267 |
6-33 |
350-700 |
50 |
610 |
65 |
3940 |
Tobee® SP/SPR Vertical Slurry Pumps Structural Drawing:
Tobee® SP/SPR Vertical Slurry Pumps Applications:
The SP/SPR verical slurry pumps are available in a wide range of popular sizes to suit most pumping applications. The SP/SPR sump pumps are proving their reliability and efficiency worldwide in: minerals processing, coal preparation, chemical processing, effluent handling, sand and gravel and almost every other tank, pit or hole-in-the ground slurry handling situation. The SP/SPR pump design with either hard metal (SP) or elastomer covered (SPR) components makes it ideal for abrasive and/or corrosive slurries, large particle sizes, high density slurries, continuous or "snore" operation, heavy duties demanding cantilever shafts.
Spare Parts:
Company Information:
Introduction
Hebei Tobee Group Co.,Limited, is a professional manufacturer in designing and manufacturing Slurry Pumps, Pipe & Fitting, Valve etc. Our factory is located in the High tech Development Zone, Shijiazhuang City, China. We specialized in Horizontal Slurry pump, Vertical slurry pump, Gravel sand pump, Dredging pump, Double suction pump, End suction pump, Multistage pump, Boiler feed water pump, Self priming pump, Inline centrifugal pump, Sea water pump, Chemical pump, Irrigation pump, Fire pump, API 610 centrifugal oil pump, Submersible slurry pump, Hydraulic slurry pump, Hydraulic dredge pump, Submersible sewage pump, Slurry Pump spares,Pipe & fittings and Valve in domestic and else in the world.
Capacity
Tobee® Pump has a wealth of experience in the manufacturing and service of pumps and accessories; in fact Tobee® Pump has machinery manufacturing experience of over 45 years having achieved great success with R&D and manufacturing of Pumps for more than 30 years. The annual production capacity of pumps in our factory surpasses 10,000 easily. Tobee® Pump has a tremendous market share that covers more than 30 cities in China including many provinces and autonomous regions and more than 80 countries.
Production Capability
Tobee® Pump has over 80 sophisticated equipment such as CNC, Director reading Spectrometer, CMM (Coordinate Measuring Machine), Rapid typing Machine and etc. Based on these facilities, Tobee® Pump has the abilities of material inspection, casting, welding, machining, assembling and the performance test of pump unit. The maximum weight of the casting by Tobee® Pump is about 12 tons, the maximum diameter of the casting can be machined by Tobee® pump is over 5 meters and the maximum flow rate of Tobee's Pump product is more than 80,000 cubic meters per hour. With an annual production of 1000~120,000 pumps, Presently,Tobee® Pump is the Top 10 pump manufacturer with high comprehensive capacity of design and producing.
Technical Capability
As a High & New Tech enterprise, Tobee® Pump owns a municipal research center with strong R&D research capability and a team of more than 150 engineers along with 45 senior engineers. There are material laboratory, physical lab, chemical lab, 3D scanning equipment, MAXUM, 3D coordinate measure machine, metallographic analysis software, casting simulation software, CFD computer aided design, PLM (product lifecycle management), CAPP and etc. hardware and software in Tobee® factory. In addition to these, Tobee® Pump continually introduce new technology technologies to improve the products comprehensive performance, like Lost Foam Casting and Vacuum Casting technology.
Market Standing
Tobee® pump's humongous market share and its unrelenting competitiveness in the pump market have made us rank Top 10 in China for many years and were also selected as the Pacesetter Enterprise in the Chinese Industrial Pump Industry. This warrants enough proof of our distinctive position in the pump market today.
R&D Capabilities
Since ours is a high tech enterprise of the Hebei Province, Tobee® Pump has a municipal level research centre and has strong abilities in product research and development because of our powerful research team. We also like to profess that we have a long standing technical cooperative relationship with many renowned research institutions which only shows the strength of Tobee's R&D capabilities.
Customer Evaluation
All the products manufactured by Tobee® Pump are well received by our customers and have gained high appraisal from the society noting certain qualities of our products like energy saving, overall efficiency, stable operation and long service life. Some of our customers refer to Tobee® Pumps simply as "Permanent Pumps" because of our quality and defect-free manufacturing ability.
Our Team
In order to sustain and grow organizations we must recognize that your satisfaction is pivotal, as you ultimately determine the quality and the value that you perceive from our products. Tobee® Pump outlines a set of core corporate values that all members in the stakeholder value chain must uphold, and is aligned with the aim to exceed your satisfaction.
What we believe in - our core values
Customer focused
Anticipating and researching your wishes and requirements; responding to these and supplying added value.
Quality focused
Setting high standards for the qualtiy of our own and other people's work; constantly aiming for improvement.
Result driven
Focused on setting targets and actively achieving results.
Flexible
Able to adapt to changing circumstances and where necessary changing our approach or behaviour in order to still attain the intended goal.
Customer Evaluation: All the products manufactured by Tobee® Pump are well received by our customers and have gained high appraisal from the society noting certain qualities of our products like energy saving, overall efficiency, stable operation and long service life. Some of our customers refer to Tobee® Pumps simply as "Permanent Pumps" because of our quality and defect-free manufacturing ability.
FAQ:
1.Q:Are you a factory or trading company?
A:We are a big manufacturing pump factory with 30 years experience.
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in Shijiazhuang City, Hebei Province, China.You can fly to Shijiazhuang airport directly.All our clients, from home or abroad, are warmly welcome to visit us!
3.Q:What is The material of your pumps?
A: The materials can be selected by High chrome alloy or Rubber,Polyurethane,Cast iron,SS304,SS316,CD4MCu,Duplex SS,Bronze etc. We can also choose material as customers' requirement.
4.Q:How can I get some samples?
A: We are honored to offer you samples.
5.Q:How does your factory do regarding quality control?
A:"Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has 15~20QC.
Audited Supplier 
){kind=link}
){kind=link}