Product Description
Product Details:
Hydroman® Submersible Dredging, Slurries and Solids Pump with Water Jet Ring is the pump type that pump and motor are coaxial, when the submersible desilting pump is working, the motor shaft drives the impeller of the pump to rotate to transfers the energy to the slurry medium, so that submersible electrical transfer pump can generate a certain flow rate, drive the flow of solids, and realize the conveying of slurry. In addition to the main impeller, the submersible desilting mud pump is also equipped with a separate agitator at the bottom and can also be equipped with independent cutter heads on two or more sides to prevents large solids from clogging the pump submersible heavy duty for sewage and causing the submersible sludge pump to completely mix solids and liquid for easy handling.
Design Features:
▪Priming: Submersible desilting pumps are self-priming because they operate below the surface of the fluid being pumped.
▪Cavitation: As electric submersible dredging pumps with cutter heads are fully submerged, submersible dredging pumps are not prone to cavitation. This can be a problem with centrifugal pumps and other types of positive displacement pumps.
▪Noise: Being submerged, these desilting submersible pump with built-in agitator electrical are very quiet in most applications.
▪Long-life: The mechanical seal of sand agitator submersible dredging pumpuses a new hard and corrosion-resistant tungsten-titanium material, which enables the pump to run safely for more than 8,000 hours.
▪Safety: The automatic control cabinetcan be equipped according to the user's needs to automatically protect the submersible de-watering slurry pumps from water leakage, leakage overload, and over-temperature, which improves the safety and reliability of the product.
Detailed Photos
Product Parameters
Hydroman® Submersible Dredging, Slurries and Solids Pump with Water Jet Ring Specification:
| Frequency: |
50Hz, 60Hz |
| Usage: |
Dredging, Desilting, Reclamation, Mining, Relief of Mud Floods, Mud Pumping |
| Power: |
Electric motor |
| Application: |
Lime Slurry, Coal Runoff Sumps, Food Waste |
| Accessory: |
Dredging Head Cutters, Agitator, Head Cutter, Water Jet Ring, Cooling Jacket |
| Outlet: |
2inch - 18inch |
Hydroman® Submersible Dredging, Slurries and Solids Pump with Water Jet Ring Applications:
Electric agitator submersible dredging pumps with cutters are generally very reliable and able to operate well in harsh conditions, suitable for chemical, petroleum, pharmaceutical, mining, paper industry, cement plants, steel mills, power plants, coal processing industries, as well as urban sewage treatment plant drainage systems, municipal engineering,construction sites and other industries, conveyor belt particles of sewage, sewage, It is also used to pump clean water and corrosive media.
These are some of the main applications for electric heavy duty submersible dredge pump:
Wastewater: submersible sludge sewage pumps with agitator are widely used in the grit and wastewater industry. They are often used in pump and lift stations because they are compact and are less costly to install than other pumps.
Sewage treatment: This application requires submersible dewatering sludge mud pumps, such as submersible grinder pumps, that can transport solid material without obstruction from pump inlet to discharge. These pumps often reduce sewage material to particles for easier handling and downstream treatment.
Sump pumping: submersible slurry pumps electrical for drill water, diesel, brine, water, mud are often used to remove water that has accumulated in a low-lying area or pit where water can collect. An example is removing tailings ponds from mining operations or removing water from the basement of a building due to flooding.
Dredging: these submersible barge unloading suction dredger pumps are used by port authorities to dredge a harbor. They have to be specially designed to handle liquids with high solid content.
Wells: water wells and boreholes employ these submersible de-watering pumps to lift water to the surface. The oil and gas industry uses submersible drill mmud pumps extensively to lift oil to the surface from deep wells.
Mining: mines use submersible dewatering slurry mud pump with agitator to contend with severe conditions because mine water is highly acidic and carries suspended solids.
Oil and Gas: Many submersible pumps in the oil and gas industry operate according to the electric submersible pumping principle. This is a cost-effective method of lifting large volumes of fluids
After Sales Service
Hydroman® was founded by Tobee® in 2008's as a manufacturer of heavy duty submersible slurry pumps in North of China. Hydroman® mainly specialized in submersible slurry pumps, submersible sand pumps, submersible dredging pumps, Submersible agitator slurry pumps, Submersible Dewatering Pumps, Submersible sludge pumps, Submersible sewage pumps, hydraulic slurry pumps, hydraulic submersible dredge pumps, Excavator mounted hydraulic dredge pumps and all accessories like cutterheads, agitators, strainers, cooling jackets, excavator, sparge rings and hydraulic oil station etc.Hydroman® pump's humongous market share and its unrelenting competitiveness in the pump market have made us rank Top 10 in China for many years and were also selected as the Pacesetter Enterprise in the Chinese Industrial Pump Industry. This warrants enough proof of our distinctive position in the pump market today.
FAQ
1. Are you the manufacturer or trading company?
Yes, We are real manufacturer for submersible slurry pumps with full export experience.
2. Is it easy for customers to change the parts by themselves?
Yes, Hydroman® submersible slurry and sand pump structure is simple, customers can change it very easily.
3. Whether the submersible slurry pumps in stock or not?
Yes, our submersible slurry pumps are always in stock.
4. What is the time for the submersible sand pumps can be sent out after payment?
It is only 7 -10 days that the submersible dredging sand pump will be sent out to you.
5. How long is the warranty period for your submersible dredge pump?
Our warranty period for the whole pump is 2 years except for wetted end parts.
Audited Supplier 
){kind=link}