Tobee 2X1.5B AH Slurry Pump of Fly Ash Slurry Pump and Closed Impeller Sludge Pump

• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Model NO.: AH
• Speed: 1200-3200 R/Min
• Seal Arrangement: Packing Seal, Expeller Seal, Mechanical Deal
• Material: High Chrome, Polyurethane, Rubber Lined
• Impeller Dia: 365 mm
• Brand Name: Tobee
• Matching Power: 15 Kw
• Impeller Vane No.: 5
• Transport Package: Wooden Case
• Specification: 1000x1000x800mm
• Trademark: Tobee
• Origin: China
• HS Code: 8413709990
• Production Capacity: 2000 MOQ

Product Description

Name:	Slurry Pumps
Model:	AH
Shaft seal Module Design:	Expeller drive seal, Packing seal, Mechanical seal
Material Liner and Impeller	Metal, Rubber, Ceramic, Polyurethane
Farme Type	A, B, C, D, E, R, F, G, S, T
Drive Type	CR, CV, ZV, DC
Certification	ISO, CE, SGS
MOQ	1 set
Materials	Mahigh chrome alloy, Rubber, Stainless steel, Metal etc

Tobee® AH Slurry Pumps Presentation:
Tobee® AH slurry pump are the most comprehensive range of centrifugal slurry pumps for use in mining, chemical and general industry applications. The horizontal slurry pumps are designed for heavy duty applications such as mill discharge, power sector and tailings as well as specialty applications, which are used for continuous pumping of high abrasive, high density slurries.
2/1.5B-AH Slurry Pump is designed for handling highly abrasive,high density slurries with excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. It widely used for Pipeline transport, High velocity hydraulic transport, Mineral processing, Coal prep, Cyclone feeds, Aggregate processing, Fine primary mill grinding, Chemical slurry service, Tailings, secondary grinding, Industrial processing, Pulp and paper, Food processing, Cracking operations, Ash handling.


Tobee® AH slurry pumps detailed specification:
√ The Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and lowest maintenance
√ The Large, open internal passages designed to reduce internal velocities, maximize wear life and lowest maintenance
√ Heavy duty construction with through-bolt design provides ease of maintenance and Min downtime
√ The Replaceable and Interchangeable wet end parts are lower the stocking cost, easy to repair and Min downtime
√ The Ductile iron fully lined casing provides durability, strength, safety, and long service life recommended while the Grey iron liner is the economic solution could meet the most customers required especially when you don't need the pumps work at 24x7
√ Minimal shaft/impeller overhang reduces shaft deflection and increases packing life and the mean time between failures
√ Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life, which is another way to increase the mean time between failures
√ Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime
√ Lower NPSH requirements results in enhanced hydraulic performance and extended the wear life
√ The metal or rubber parts are available for different work conditions Max the wear life and lowest the maintenance cost


Tobee® AH Slurry Pump Shaft Seal:
Packing seal:
As one of the most commonly used seals for rotating shafts, the packing seal can come with low-flush or full flush arrangement which uses flushing water to prevent media from escaping the pump housing. This kind of seal is suitable for use under all pumping conditions. In situations where corrosive solids or high temperature might be encountered,  aramid fiber is used as the packing material for the gland. For high abrasion conditions, a ceramic shaft sleeve is available.
Expeller seal:
The combination of impeller and expeller creates the pressure needed to seal against leakage. Together with the gland seal or lip seal which is used as the shut-down seal, this type of seal can handle sealing requirements for applications where full-flush gland seal is impractical due to lack of water on the site, or sealing water is allowed to enter inside the pumping chamber to dilute the slurry.
Mechanical seal:
TH series heavy duty slurry pump utilizes a leak-proof mechanical seal design which allows easy installation and replacement. Other types of mechanical seal are among options to suit the slurry pump for various pumping applications.




Tobee® AH Slurry Pump Drive Type:

Tobee® AH Slurry Pumps Quick Selection Chart:



Tobee® AH Slurry Pumps On-site Applications:
Mining, Mineral processing, Coal prep , Cyclone feeds, Tunnel, Chemical slurries, Tailings, Mill grinding, Ash handing, Paper and Pulp, Waste sludge, Coarse sand,   Lime mud, Phosphoric acid, Dredging, Construction, Alumina Industry, Power Plant, Potash Fertilizer Plant, Other industries.


Company presentation:
Hebei Tobee Pump CO.Limited is a professional manufacturer in designing and manufacturing Centrifugal Slurry Pumps, Pipes & Fittings, Valves etc. Our factory is located in the High tech Development Zone, Shijiazhuang City, China. We specialized in Horizontal slurry pumps, Vertical slurry pumps, Gravel sand pumps, Dredging pumps, Paper pulp pumps, Molten Salt Pumps, End suction pumps, Double suction pumps, Multistage pumps, Boiler feed water pumps, Self priming pumps, Inline centrifugal pumps, Sea water pumps, Chemical pumps, Irrigation pumps, Fire pumps, API 610 centrifugal oil pumps, Sewage pumps, Submersible slurry pumps, Slurry Pump spare parts, Pipes & fittings and Valves in domestic and over 80 countries in the world.